Sealing a Drafty House: Where Heat Escapes and How to Stop It

A room-by-room guide to air leaks, windows, floors, attics and the safety checks that go with sealing up.

November 17, 2026

How warm a room feels depends on more than the air temperature. Drafts move cold air across your skin, cold windows and floors draw heat away from your body, and dry air makes you feel cooler.

This guide goes through the most common places heat escapes, in the order an energy auditor would usually tackle them: cheapest and most effective first.

Doors and windows

Worn or missing weatherstripping around doors and windows is one of the most common sources of drafts. Self-adhesive foam strips, V-strips and door sweeps are inexpensive and easy to fit.

For gaps between a window frame and the wall, use caulk. For old single-pane windows, a clear plastic window insulation kit or heavy thermal curtains can noticeably reduce heat loss for little money.

The hidden leaks

Many air leaks are less obvious than a rattling window. Outlets and switches on outside walls, gaps where pipes and cables pass through walls, recessed lights, the attic hatch and the gap where the house sits on its foundation all let air move in and out.

Foam gaskets behind outlet covers, caulk or expanding foam around pipes and weatherstripping on the attic hatch are all straightforward DIY fixes.

Floors and cold feet

Floors over a basement, crawl space or garage often feel cold. Rugs and slippers help right away. In the basement, sealing and insulating the rim joist, where the floor framing meets the foundation wall, is a common fix.

Tile and wood feel colder than carpet at the same temperature because they draw heat from your feet faster.

The attic

Because warm air rises, the attic is often where the most heat escapes. If you can see the tops of the ceiling joists, the insulation is probably too thin for most U.S. climates.

Sealing air leaks in the attic floor before adding insulation makes the insulation work better. Utilities often offer rebates or free energy audits, and a contractor can check your attic safely if ladders and narrow beams are a risk for you.

Make the air feel warmer

Keep indoor humidity between 30 and 50%, as the EPA suggests. Open curtains on sunny, south-facing windows during the day and close all curtains at dusk.

If you have a ceiling fan, run it clockwise on low in winter to push warm air from the ceiling back down without creating a breeze.

Sealing up safely

A tighter house needs a healthy heating system. Have fuel-burning furnaces, boilers and water heaters serviced, make sure they vent properly and keep working carbon monoxide alarms on every level and near bedrooms.

Bathrooms and kitchens still need their exhaust fans to remove moisture. If windows start dripping with condensation after sealing, ventilation or humidity needs attention.

Frequently asked questions

Should I replace my windows to stop drafts?

Usually not first. New windows are the most expensive fix with the slowest payback. Sealing gaps, weatherstripping, window insulation kits and thermal curtains come first.

Does closing vents in unused rooms save money?

With forced-air heating, often not. Closing vents can raise duct pressure and leakage. Closing doors is fine, and with room-by-room heat such as baseboards or radiators with valves, heating only the rooms you use does save.

Why does 68°F feel colder in winter than in fall?

Colder windows, walls and floors draw more heat from your body, and winter air is drier. Sealing drafts and keeping humidity at 30 to 50% helps 68°F feel warmer.

More guides