Grout Cleaning Step by Step: Methods for Every Stain

A detailed routine for mildew, soap scum, hard water and grease, plus how to keep grout clean longer.

November 11, 2026

Grout is usually a cement-based material full of tiny pores, which is why it absorbs water, soap and dirt so easily. Cleaning it well means removing what sits on top without damaging the grout itself.

Below is a general routine, followed by specific methods for the most common stains. Always check the label of any product you use, because instructions and dwell times vary.

Gather the right tools

A good grout clean does not require much equipment, but the right tools make the job easier and safer for your surfaces.

Mold and mildew

Spray a mildew remover made for bathrooms or grout onto the stained area, with the fan running and a window or door open. Let it sit for the time on the label, then scrub with a nylon brush and rinse well with clean water.

Chlorine bleach products can lighten mildew on white grout but may discolor colored grout. Oxygen-based cleaners are a gentler option many people use on colored grout. If the black spots are in the soft silicone along corners and seams rather than in the grout, cleaning usually won't fix it for long, because the mold grows inside the caulk. Replacing the caulk is the lasting fix.

Soap scum and hard-water film

Soap scum and mineral deposits form a dull layer that bleach does not dissolve. Use a cleaner designed for soap scum and hard water, let it sit for a few minutes, scrub and rinse thoroughly.

Many of these cleaners are mildly acidic. Acids can etch cement grout and damage natural stone like marble, so test first, rinse well and do not leave acidic cleaners sitting for long. Never use them together with bleach. A paste of baking soda and water is a milder option for light buildup.

Kitchen grease and everyday dirt

Behind a stove or sink, grout often collects a sticky mix of grease and dust. Warm water with dish soap or a degreasing cleaner breaks it down. Let it soak for a few minutes before scrubbing, then rinse and dry.

For general dirt in floor grout, a grout cleaner or a baking soda paste and a stiff brush usually work. Steam cleaners can also loosen grime, but check that they are suitable for your tile and grout first.

When cleaning doesn't work

If a stain comes back within weeks, look for the cause. Grout that never dries points to a ventilation problem. Grout that darkens when it gets wet has likely lost its sealer. Grout that is cracked, crumbling or stained all the way through may need replacing.

Persistent stains can also hint at water getting behind tiles. If you notice loose tiles, soft spots or a musty smell that won't go away, have a qualified tiler or contractor take a look.

Keeping grout clean longer

Run the exhaust fan during showers and for a while afterward, and leave the door open when you can. A quick squeegee or wipe of the walls after each shower removes much of the water that feeds mildew and scum.

Once grout is clean and fully dry, a penetrating grout sealer helps it resist stains. In wet areas, many people reseal every year or two, depending on the product and how much use the area gets.

Frequently asked questions

Can I use vinegar to clean grout?

Vinegar is acidic and can help with light mineral buildup, but repeated use can wear down cement grout and damage natural stone. Use it sparingly, rinse well and never combine it with bleach.

Why does my grout turn black again so quickly?

Usually because the area stays damp, the sealer has worn off, or the mold is actually inside the silicone caulk. Improving ventilation, resealing or recaulking addresses the cause, not just the stain.

Is it safe to use bleach on colored grout?

Chlorine bleach can lighten or blotch colored grout. Test on a hidden spot first, or choose an oxygen-based or color-safe grout cleaner.

How often should I deep clean grout?

It depends on use and ventilation. Many people do a light weekly clean and a deeper grout clean every month or two in busy bathrooms.

More guides