Setting Up a Thermostat Schedule That Saves Without Feeling It

How a setback works, how to choose your numbers, and the exceptions for heat pumps, older adults and freezing weather.

November 17, 2026

The idea behind a setback is simple: your home loses heat faster the bigger the difference between inside and outside. Lowering the inside temperature for part of the day means less heat escapes, so the system has less to replace.

This guide explains how to choose your numbers, how to program them and when a smaller setback, or none at all, is the better choice.

Choosing your numbers

Start with 68°F for the hours you're awake and at home. If that feels cool, a sweater and slippers often help more than a degree or two on the thermostat.

For sleep and for the hours nobody is home, set the heat 7 to 10 degrees lower. For most homes that lands around 60 to 62°F. If that feels too cold at first, start with a smaller setback and lower it a degree at a time over a few weeks.

The warm-up myth

Many people believe a furnace uses more energy to reheat a cool house than it saved overnight. The Department of Energy says the opposite is true: because a cooler house loses heat more slowly, the energy saved during the setback is more than the energy needed to warm back up.

Turning the thermostat way past your target to speed things up doesn't help either. Furnaces, boilers and heat pumps deliver heat at roughly the same rate regardless of the number you ask for, so you only end up overshooting.

If you have a heat pump

Heat pumps are very efficient at holding a steady temperature, but when asked to make up a big difference quickly, many switch on electric resistance backup heat, which is much more expensive to run.

With a heat pump, keep setbacks modest, about 2 to 4 degrees, or use a thermostat designed for heat pumps that raises the temperature slowly in the morning. Your installer can tell you how your system handles recovery.

When not to set back

A setback isn't right for every household. Older adults, babies and people with certain health conditions can be more sensitive to cold. For older adults, the National Institute on Aging advises keeping the heat at least 68 to 70°F.

In freezing weather, never let the house fall below about 55°F, even when you're away for days. Pipes in outside walls, crawl spaces and under sinks can freeze and burst.

Making the schedule stick

The biggest enemy of a schedule is the manual override. Many thermostats offer a temporary hold that returns to the schedule at the next time slot, which lets someone warm up for an evening without undoing the plan.

Agree on the numbers as a household. A thermostat that keeps being pushed up and down wastes more energy than one that stays a little warm but steady.

Frequently asked questions

Is it cheaper to leave the heat at one temperature all day?

For most homes, no. A house loses heat more slowly when it's cooler inside, so lowering the setting at night and while you're out saves energy. Heat pumps are the main exception, and even then a small, gradual setback usually works.

How much can a setback save?

The Department of Energy says turning the thermostat back 7 to 10 degrees for 8 hours a day can save up to 10% a year on heating and cooling. Actual savings depend on your climate, home and system.

Do I need a smart thermostat?

No. Any programmable thermostat can run a schedule. Smart thermostats make it easier by learning your routine and letting you adjust from your phone, but the savings come from the setback itself.

What's the lowest safe setting when I'm away in winter?

Around 55°F is the usual minimum in freezing weather, to protect pipes. If anyone at home is older, very young or unwell, keep it warmer.

More guides