Cold at 68? How to Stop Your House Losing Heat
Why some homes feel chilly at any thermostat setting, and the cheap fixes an energy auditor starts with.
✅ If you're cold at a normal setting, the problem is usually heat escaping, not a thermostat set too low.
Keep readingNovember 17, 2026
Turning up the thermostat in a drafty house mostly heats the outdoors. The system runs longer, the bill goes up and the cold spots stay.
The good news is that the first fixes are cheap and quick: finding air leaks, sealing them and helping the air feel warmer.
The key points
- Find the leaks: Feel for drafts around windows, doors, outlets on outside walls and the attic hatch on a cold, windy day.
- Seal first: Weatherstripping and caulk are among the cheapest home improvements, often a few dollars per window.
- Mind the humidity: Dry air feels colder. The EPA suggests keeping indoor humidity between 30 and 50%.
- Then the attic: Heat rises, and thin attic insulation lets a lot of it escape. It's often the best-value bigger upgrade.
A five-minute draft test
On a windy day, move a lit incense stick slowly along the edges of windows, doors and outlets on outside walls. Where the smoke wavers or blows sideways, air is getting in. A damp hand works too.
Note every spot you find. Those are the places to seal before you touch the thermostat.
The short version
Before raising the thermostat, find and seal the drafts, close curtains at night, keep humidity at 30 to 50% and check your attic insulation. A sealed house feels warm at 68°F.
Read the full guide